The ProEx range of link conveyors are designed to transport boards between process machines on demand.
There are 3 standard lengths, 500mm, 1000mm and 1500mm. With the unique modular design, 'special' length requirements are easily configured.
Link conveyors have 2 operating modes, either pass through or inspect and are available with optional lift-up covers.
Available in Single and Dual lane versions.
|
| Standard Features |
| Max Board Size |
|
380mm wide x 450mm long |
| Min Board Size |
70mm wide x 120mm long |
| Board Ride Height |
950mm nominal +/- 25mm |
| Length/Width Ratio |
Board length should be greater than board width |
| Fixed Rail |
Front: travel = left to right |
| Board Edge Clearance |
4mm for transport purposes |
| Number of Drives |
500 = 1 x drive, 1000 = 2 x drive, 1500 = 3 x drive |
| Conveyor Speed |
18 m/min |
| Interfaces |
SMEMA |
| Options |
Top covers, Polycorbonate/Eslon |
| Power |
220/240V 1 phase, 50/60Hz, 5A |
| Air |
5 bar clean and dry no lubrication |
| Non-Standard |
Designed for your specific application |
|
